Descriptions of Galala Cream (Egyptian Stone): –
Material Name : Galala Cream
Marble color: beige marble
Country of origin: Egyptian marble quarry | Egypt
Material availability: Blocks, slabs, tiles
Dimensions of the slabs: 265-300cm x 160-195cm
Thickness of the slabs (Availability): 15-20-30-40-50mm (up to 200mm by order)
Dimensions of the marble tiles (Availability): Any dimensions
Thickness of the marble tiles for floors or walls: 10-12-15-20-30-40mm (up to 200mm by order)
Surface finishes: Polished, unpolished, honed, brushed, acid, sandblasted, bush hammered, tumbled, striped, split Face marble tiles
Galala Features: –
1. All finishes can be applied on Galala limestone, except flamed.
Note 1: Galala white is not preferred with tumbled finish, because it causes high wastage ratio. But Tumbled finish can be applied on strong materials like Galala cream.
1. It’s preferred the most with epoxy resin treatment.
2. It can be used in interiors, walls, floors (but not high traffic ones).
3. It doesn’t need Anti-salts treatment.
Material defects:
1. It’s Hard to find one color Galala block, even if it is extracted from the same quarry, except Galala Extra.
2. Even when we cut the Galala Extra block into slabs, it’s hard to find big slab without cracks. For these 2 reasons, Galala Extra costs more than others.
3. Its water absorption ratio is high, so it’s not recommended for high traffic floors, therefore it’s recommended only for indoor floors.
Descriptions of Galala Marble ( Egyptian Stone):-
Galala color: beige marble
Kind : Natural Stone
Marble quarry origin: Egyptian marble quarry | Egypt
Material availability: Blocks, slabs, tiles
Dimensions of the slabs: 265-300cm x 160-195cm
Thickness of the slabs (Availability): 15-20-30-40-50mm (up to 200mm by order)
Dimensions of the marble tiles (Availability): Any dimensions
Thickness of the marble tiles for floors or walls: 10-12-15-20-30-40mm (up to 200mm by order)
Surface finishes: Polished, Saw-cut, honed, brushed, acid, sandblasted, bush-hammered, tumbled, striped, split Face marble tiles
Standard Specifications & Technical Data:-
Compressive Strength (ASTM C 170): 10 300 psi
Flexural Strength (ASTM C 880): 1 200 psi
Abrasion Resistance (ASTM C 241/ C 1353): 40.1 Ha
Density (ASTM C 97): 2 561
Water Absorption (ASTM C 97): 1.42 %
Modulus of Rupture (ASTM C 99): 1 700 psi
